| SnapMax
Designed
to be the most user-friendly vine shelter on the market, the SnapMax
Vine Shelter suppresses lateral growth, maximizes vine survivability
during the first twelve months, and reduces vine management costs. Snapmax
Vine Shelters are quickly and easily assembled and removed. The interlocking
side tabs allow for easy assembly and removal as well as for easy access
to the vines. The top-folding flap allows for the Snapmax Vine Shelter
to be attached directly to the cordon wires that are approximately 30
inches off the ground. Side slots can be used to secure the SnapMax
directly to a variety of vine supports, including bamboo, rebar and
pencil rod. An optional wire clip can be used to secure the SnapMax
to cordon wires of varying heights.
See
below for assembly instructions
SnapMax Vine Shelters provide the
following benefits to growers
- protection from wind (sandblasting, storm protection,
etc.)
- increased survivability rate of vines through the first
twelve months
- enhanced growth rates up to 2-3 times faster then unprotected
vines
- protection and safety from predators, (rabbits, deer,
raccoons, etc.)
- herbicide protection for weed control
- reduced overhead
- reduced labor savings (reduces vine management costs)
- reduced irrigation costs due to water conserving benefits
of SnapMax
- reusable for several years
SnapMax Features
- interlocking tabs for fast, easy assembly and removal
- easy access to vines without opening the entire shelter
- ventilation holes (if activated)
- top, folding flap enables SnapMax to be attached to
trellis wires located at 30" height
- durable, able to last 3 season
- stays secure in the strongest winds
- optional wire clip to attach SnapMax to trellis wires
of various heights
|
| |
SnapMax Assembly Video
Assembly is quick and easy
|
| |
SnapMax Assembly
| 
|
1. Fold sides along
creased lines.
Always start from the top of the guard. |
2. Hold
a tab in between each thumb and forefinger and pull
them across each other.
|

|
|

|
3. Cordon
/ dripper wire sits in saddle at the top of the guard. Fastening
tab folds forward over the wire. |
|
|
4.
Mound / bury the Snapmax™ base 2 - 3 cm in the
ground to ensure it is 100 percent herbicide and rodent free.
|
|
|
 |
 |
Got
Milk?
Tri-Wrap Milk Cartons for Vine Shelters?
. . . the economical alternative!
- Made of high-internalized bleach board
- 20" tall x 5.5" x 5.5"
- 96% biodegradable
- Ready to use, no stapling or construction required
- Corner slots for vine support stake
- Choice of sizs:
- 20" x 5" x 5" x 5" white
paperboard
- 24" x 4" x 4" x 4" foil
lined paperboard
|
|