| |
 |
| |
| WIRELOK™ |
 |
Wirelok, the unique new joiner
for high tensile 2.5 mm (12 gauge) wire. For stock fenses,
deer compounds, grape trainers, orchard espaliers, garden
fences - anywhere you need to join or restrain 2.5 mm wire
quickly, reliable, and economically.
Wirelok uses the best
materials:
stainless steel springs, durable zinc body. |
|
|
|
|
|
|
Suitable
for
aluminum-clad wire.
|
|
|
| |
|
|
| |
THE
KWIK-LOC SELF-LOCKING WIRE JOINER FOR FENCING AND TRELLISING |
 |
| Click
image to enlarge |
| Product
Range |
| Model |
Plain
Wire |
Barbed
Wire |
Working
Load |
| KL100 |
14-17
ga |
|
600
lbs. |
| KL100 |
12-13
ga |
15.5
ga |
600
lbs. |
|
|
 |
 |
| Specifications |
Key
Benefits |
- Not
for use for loads outside the stated range of the
product
- Do
not exceed the safe working load of the product
- Do
not use on coated wire rope
- Do
not apply paint or other coating
- Do
not apply lubricant
- Do
not use for lifting
- Keep
the product clean and free from dirt
- Remove
damaged wire end prior to inserting into the Kwik-Loc
- Do
not use in chlorinated atmospheres
|
- Strong:
As strong as the wire
- Durable:
Weatherproof, made of zinc alloy
- Versatile:
Many uses
- Fast:
Installed in seconds, no need for tools
- Removable:
can be re-use
- Easy:
Self-locking, simple push-fit
- Adjustable:
Easily adjustable with outside pin
- Safe:
consistent, reliable, and efficient
|
|
|
|
| |
|
|
| |
Guide
to Trellising Installation
and Maintenance |
 |
| USING
SYSTEM GRIPPLE, POST-HARVEST MAINTENANCE IS UP TO SIX
TIMES FASTER, ENABLING THE GROWER TO SPEND LESS TIME WORKING
WITH THE TRELLIS, AND MORE TIME WITH THE CROP. |
| PRODUCT
RANGE |
| Gripple
Wire Joiner/Tensioners are available in four sizes: Small
for stainless steel trellis wire, Medium is suitable for
the vast majority of trellising requirements, and Large
for mild steel barb wire and plain wire. Completing the
range, the Maxi Gripple Wire Joiner/Tensioner is designed
for high load, high tensile wire. |
| MODEL |
PLAIN
WIRE |
BARBED
WIRE |
WORKING
LOAD |
| SMALL |
14-17ga |
|
450lbs |
| MEDIUM |
12-13ga |
15.5ga |
700lbs |
| LARGE |
|
12.5ga |
350lbs |
| MAXI |
8-11ga |
|
1400lbs |
|
|
| HOW
IT WORKS |
| Inside
the Gripple Wire Joiner/Tensioner, each wire moves in
one direction only, passing over high precision gear-tooth
rollers. The moment any load is applied in the opposite
direction, the rollers bit, locking the wires. |
 |
System
Gripple is the easy way to join and tension wire.
It can be used in the following ways: |
 |
In-Line
Join
Simply push a Gripple Wire Joiner on to one end
of the wire and push the end of the other roll of
wire through the second channel to create a secure
join. |
 |
Loop
Anchor
Smply push a Gripple Wire Joiner Tensioner on to
one end of the wire, feed the wire around the post,
pushing the end of the wire back through the second
channel of the Gripple Wire Joiner. |
 |
Repairs
Broken wires are easy to repair. Rather than replace
the wire from post to post, a new piece can easily
be inserted with two gripple Wire Joiners and a
piece of replacement wire. |
 |
Anchoring
End posts can be quickly and easily installed to
feed a length of wire around the post, through the
staple and securing at the ground anchor point with
a Gripple Wire Joiner. This method saves time, labour,
and can be re-tensioned using the Gripple Tensioning
Tool. Gripple can now offer the complete end post
anchoring kit - Anchor-Fast. |
|
|
|
|
| |
|
|
| |
 |
|
|
Gripple
Releasable
The
new Gripple Releasable has been designed specifically
to tension and release the tension on fruit bearing
wires in the viticulture sector.
The Gripple Releasable allows fruiting wires to be
tensioned; the tension can subsequently be released
in the trellis to allow the wires to be re-positioned
during the fruiting season and again after the harvest
to allow pruning to be carried out more easily.
To release the Gripple, the Release Tool is required.
Like the Gripple Tensioning
Tool, the Gripple Release Tool is easy and quick
to use.
It offers time saving in the tensioning of fruiting
wires and facilitates maintenance after the harvest.
By using Gripple Releasable the vine growers do not
need to lower the fruiting wires to the ground in
order to prune the vines - this limits the risk of
injury and does not cause damage to the wires.
|
|
|
|
| |
|
|
| |
Spec
Trellising . . . When Quality Counts! |
|
|
